Jeep Navigation User Manual page 103

www.chrysler.com/uconnect
uconnect or www.jeep.com/uconnect
Phone pairing can either be done using the touch screen
(see Getting Started section in this manual) or using voice
commands.
Pairing will walk you through a series of steps that will
establish a connection between your handset and the
UConnect system in the vehicle.
Once set up, you do not need to re- pair your phone with
each use. However, every new phone must be paired
before it can be used.
The following are general phone to UConnect System
voice pairing instructions:
1. Press the UConnect hard-key to begin.
2. Wait for the beep.
3. Say PHONE PAIRING.
or www.dodge.com/ 4. When prompted, after the beep, say PAIR A PHONE
and follow the audible prompts.
5. You will be asked to say a four-digit pin number
which you will later need to enter into your cellular
phone. You can enter any four-digit pin number. You will
not need to remember this pin number after the initial
pairing process.
6. The UConnect system will then prompt you to begin
the cellular phone pairing process on your cellular
phone. Before attempting to pair phone, please see your
cellular phone's user manual (Bluetooth
instructions on how to complete this step.
7. For identification purposes, you will be prompted to
give the UConnect system a name for your cellular
phone. Each cellular phone that is paired should be given
a unique phone name.
NAVIGATION 101
section) for