Station Presets; Change A Channel Or Frequency; Rbds (Radio Broadcasting Data System); Radio Text Information - Jeep Navigation User Manual

Station Presets

There are 12 station presets available for storing the radio
stations in each tuner range.
In order to store the desired station, touch one of the
station preset soft-keys for four seconds. You will also see
the radio station stored in the highlighted soft-key, and
you will hear a confirmation beep when the station is
saved.

Change a Channel or Frequency

Press the SEEK up or the SEEK down hard-key to play
the next available station or channel.
Select DIRECT TUNE to enter a frequency or a channel
number, and confirm your selection by pressing the GO
soft-key.
Touch the arrows to the left and right of the DIRECT
TUNE soft-key to step manually through the frequency
or channel roster.
Select the SCAN soft-key for a five second preview of
each listenable station in the frequency band. Touch the
SCAN soft-key again to stop the scan function and to
select a radio station.

RBDS (Radio Broadcasting Data System)

This radio navigation system is capable of receiving
RBDS signals in the FM band. RBDS is a technology used
for transmitting textual information about the music
type, song and artist for FM band music. This informa-
tion is shown on the display.
NOTE: Not all radio stations support RBDS.
The RBDS information is displayed below the frequency
reading of the currently playing radio station.

Radio Text Information

Select the INFO soft-key to display additional radio text
information in the right half of the screen.
NAVIGATION 23