Answer Or Reject An Incoming Call; When No Call Currently Is In Progress; Make A Second Call; While Another Call Is In Progress - Jeep Navigation User Manual

Answer or Reject an Incoming Call:

When no Call Currently is in Progress: When you
receive a call on your cellular phone, the UConnect
system will interrupt the vehicle audio system, and will
ask if you would like to answer the call.
1. Press the UConnect button to accept the call.
2. To reject the call, press and hold the UConnect button
until you hear a single beep indicating that the incoming
call was rejected.
When another Call is in Progress If a call is currently in
progress and you have another incoming call, you will
hear the same network tones for call waiting that you
normally hear when using your cell phone.
Press the UConnect button to place the current call on
hold and answer the incoming call.
NOTE: The UConnect system compatible phones in
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only either answer an incoming call or ignore it.

Make a Second Call

While Another Call is in Progress:

1. To make a second call while you are currently in a call,
press the VR hard-key.
2. Say DIAL or CALL followed by the phone number or
phonebook entry you wish to call.
3. The first call will be on hold while the second call is in
progress. To go back to the first call, refer to section
"Toggling Between Calls."
4. To combine two calls, refer to section "Conference
Call."
NAVIGATION 107