Jeep Navigation User Manual page 60

48 NAVIGATION
NOTE: If the disc is not removed within approximately
10 seconds, the unit pulls it back into the slot (park
position). The disc may be ejected when the ignition is
off.
Selecting a Disc
Press one of the preset buttons (1-6) to select and play a
disc in a specific slot of the disc changer, while in DISC
mode.
Selecting Disc Mode
Toggle between the media menus by pressing the MEDIA
button.
NOTE: When a disc is inserted, the appropriate mode is
automatically selected once the disc is recognized.
Scan Search
Press the SCAN button.
The individual tracks of the disc will be played in
succession for 10 seconds each.
Press the SCAN button again to stop the scan function.
Next Track
Press the SEEK up button. The next track on the disc is
played. Once the last track has been reached in the
forward direction, the unit will loop back to the first
track.
Previous Track
Pressing the SEEK down button plays the previous track.
If the first track has been reached in the backward
direction, the unit will switch from the first track to the
last track. If a track has been playing for more than
1 second when SEEK down button is pressed, the unit
will skip back to the beginning of the current track.
Fast Forward Track
Press and hold the FF button. The audio will be heard at
a reduced level while going through the track in this
mode. Stop the fast-forward by releasing the button.