Jeep Navigation User Manual page 149

Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the Uconnect™ Phone system will
provide notification to inform you of your phone and
network status when you are attempting to make a
phone call using Uconnect™ Phone. The status is given
for roaming, network signal strength, phone battery
strength, etc.
Dial Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the Uconnect™ Phone system (while
dialing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth cellular
phone, the audio will be played through your vehicle's
audio system. Uconnect™ Phone will work the same as if
you dial the number using voice recognition.
NOTE: Certain brands of mobile phones do not send the
dial ring to the Uconnect™ Phone system to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number, the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.
Mute/Un-mute (Mute off)
When you mute the Uconnect™ Phone system, you will
still be able to hear the conversation coming from the
other party, but the other party will not be able to hear
you.
In order to mute the Uconnect™ Phone system:
1. During an active call, press the Voice Command
button to begin.
2. Wait for the beep.
3. Say MUTE or MUTE ON.
NAVIGATION 137