Voice Command System; Voice Command System Operation - Jeep Navigation User Manual

Chrysler
Hide thumbs Also See for Navigation:
Table of Contents

Advertisement

108 NAVIGATION

VOICE COMMAND SYSTEM

Voice Command System Operation

This Voice Command System allows you to control your
AM and FM radio, satellite radio, disc player, navigation
system, hard disk drive storage, and a memo recorder.
NOTE:
Take care to speak into the Voice Interface
System as calmly and normally as possible. The ability of
the Voice Command System to recognize user voice
commands may be negatively affected by rapid speaking
or a raised voice level.
WARNING!
Any voice commanded system should be used only
in safe driving conditions and all attention should be
kept on the roadway ahead. Failure to do so may
result in an accident causing serious injury or death.
When you press the Voice Command
button, you will hear a beep. The beep is your
signal to give a command.
NOTE: If you do not say a command within 3 seconds,
the system will present you with a list of options.
If you ever wish to interrupt the system while it lists
options, press the Voice Command
for the beep, and say your command.
Pressing the Voice Command
system is speaking is known as "barging in". The system
will be interrupted and you can add or change com-
mands. This will become helpful once you start to learn
the options.
NOTE: At any time you can say the words CANCEL,
REPEAT, HELP, or MAIN MENU.
button, listen
button while the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents