Jeep Navigation User Manual page 134

122 NAVIGATION
Listen to the choices and give your command after the
beep.
Barge In – Overriding Prompts
The Voice Command
you wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is playing "Would you like to pair a phone, clear
a...," you could press the Voice Command
and say "Pair a phone" to select that option without
having to listen to the rest of the voice prompt.
Pressing the Voice Command
while the system is speaking is known as
"barging-in". Barging-in must be done with the
Voice Command
Help Command
If you need assistance at any prompt or if you want to
know what your options are at any prompt, say "Help"
button can be used when
button
button
button.
following the beep. The Uconnect™ Phone system will
play all the options at any prompt if you ask for help.
To activate Uconnect™ Phone from idle, simply press the
Uconnect™ Phone
prompts for directions. All Uconnect™ Phone sessions
begin with a press of the Uconnect™ Phone
Cancel Command
At any prompt, after the beep, you can say "Cancel" and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) to a Cellular Phone
To begin using your Uconnect™ Phone system, you must
pair your compatible Bluetooth enabled cellular phone
(refer to "Introduction" section to learn about the phone
type). To complete the pairing process, you will need to
reference your cellular phone owner's manual. One of
button and follow audible
button.