Jeep Navigation User Manual page 25

Turn the ON/OFF VOLUME rotary knob to adjust the
volume.
Turn the ON/OFF VOLUME rotary knob while the
navigation voice is speaking to adjust the volume of the
navigation voice.
NOTE: If the ignition is switched off with the radio in
standby mode, the radio memorizes the standby state
when the ignition is switched on again. Press the ON/
OFF VOLUME rotary knob to switch the radio on. The
navigation software is always working when the ignition
is switched on, even if the radio is in standby mode. It is
possible to eject the CD/DVD and to display the time if
the unit is switched off. It may take a few seconds for the
radio to power up and show the time or the changer
screen.
(15) RADIO
Press the RADIO button to toggle between RADIO
modes AM, FM, SAT, SATV (if equipped).
(16) MEDIA
Press the MEDIA button to toggle between MEDIA
modes HDD, DISC, AUX, VES (if equipped).
(17) NAV
Press the NAV button either to switch to the navigation
mode or to toggle between the navigation menu and the
map viewer screen.
(18) VOICE COMMAND
Press the Voice Command
wait for the confirmation beep before you say a
voice command.
NAVIGATION 13
button and