Jeep Navigation User Manual page 153

3. Say Uconnect SETUP.
4. After the following beep, say DELETE PHONE.
The phone names will be announced.
5. When prompted say the name of the cellular phone
you wish to delete.
You can also press the Voice Command
anytime while the list is being played, then say the
priority number choose select of the phone that you wish
to delete.
You may also delete a phone by using the CENTER
CONTROL knob:
1. Press the SETUP button.
2. Select Phone Pairing.
3. Select the desired phone.
4. Select Delete Pairing.
5. Confirm by selecting YES in the confirmation screen.
6. Press SETUP to exit the setup menu.
Things You Should Know About Voice Command
• Always wait for the beep before speaking
• Speak normally, without pausing, just as you would
button speak to a person sitting approximately eight feet
away from you.
• Make sure that no one other than you is speaking
during a voice recognition period.
• Performance is maximized under
− low-to-medium blower setting
− low-to-medium vehicle speed
− low road noise
− smooth road surface
NAVIGATION 141