Message Key; Turn-Over Memory Key; Elongation Key; Stock/Call Key - Janome Memory Craft 4400 Instruction Book

o
! 0
! 1
! 2

• Message key

When Message key is pressed, a detailed message will
display suitable stitches, patterns and machine settings.

• Turn-over memory key

(To memorize the pattern in mirror image)
Select a desired pattern and press TOM key so the
selected pattern's mirror image will be shown on the
screen.
Use this key to memorize and sew patterns in a mirror
image. Programmed letters or numbers will be reduced to
2/3 of their actual size when you press the TOM key.

• Elongation key

(For A Mode)
Stitches 45 to 60 (
can be elongated up to five times their normal length by
pressing this key.

• Stock/call key

When you press the Stock/call key after memorizing a
pattern or editing patterns, the currently registered
patterns will be deleted and new patterns will be stored.
Other than this, you can recall the stored patterns when
you press the Stock/call key.
You can store a maximum of 50 programmed patterns and
sew.
* You cannot store the Direct mode patterns and
buttonholes also you cannot memorize
(
memory key (see page 10).
)
) patterns by using
9