Shell Tack; Applique - Janome Memory Craft 4400 Instruction Book

q
q
q
48
w
q
w
w
e
w
e

Shell Tack

q
Stitch pattern:
w
Presser foot:
* Use a light weight fabric such as tricot.
Fold and stitch on the bias. When the needle swings to
the right, allow the needle to just clear the folded edge
of the fabric.
Open the fabric and iron on one side of the fabric.
* For the shell stitch, be aware that thread tension may
have to be adjusted depending on the fabric for the
best sewing results.
q
Fold fabric
w
Folded edge

Applique

q
Stitch pattern:
w
Presser foot:
e
Pressure dial:
* Stitch patterns, (27, 28) can also be used.
Applique, a technique for stitching fabric shapes onto
another fabric, opens limitless design possibilities.
Dimension and texture can be added by lightly stuffing all
or part of a design. This machine has several different
patterns that can be used to enhance your applique.
In this type of applique raw edges are folded under.
To finish the raw edge, cut the applique design out of
cardboard. Fuse a lightweight interfacing to the wrong
side of the fabric then cut the fabric slightly larger than the
cardboard.
Fold the fabric around the cardboard and press to form a
perfectly shaped design.
Tape the applique in place and sew, guiding the slit on foot
F next to the finished edge of the applique.
q
Applique fabric
w
Slit
e
Edge
* After sewing, return the pressure dial to 3.
25
Satin stitch foot F
26
Satin stitch foot F
2