Mode Selection Key; Twin Needle Key; Editing Key; Stitch Width Selection Key - Janome Memory Craft 4400 Instruction Book

r
t
y
u
i
8

• Mode selection key

By pressing the key, LED light will move step by step to
select the stitch mode, as shown.
Direct Mode: Direct mode pattern selection
A Mode:
B Mode:
C Mode:

• Twin needle key

Just press this button and " A " mark will appear on the
A
display screen.
Press button again for single needle sewing.

• Editing key

This button can be used for adding, deleting and changing
combinations and monograms before sewing while
programming stitch patterns or monograms.
For editing, use the stitch width "+" or "–" key to select
editing position (see page 61, 62).
[Manual setting function of the zigzag width and stitch
length for programmed patterns]
The individual programmed zigzag pattern width or stitch
length can be changed (see page 63).

• Stitch width selection key

Press "+" or "–" to change the stitch width.

• Stitch length selection key

Press "+" or "–" to change the stitch length.
Pattern selection using number keys (utility
and decorative stitches)
Character selection using number keys
(block type)
Character selection using number keys
(script type)