Inserting An Event (Create Event); Erasing An Event (Erase Event) - Roland MC-808 Owner's Manual

Inserting an event (Create Event)

1.
Depending on the event that you want to insert, execute
one of the following.
• To insert one of the following events
Note
Program Change
Control Change
Pitch Bend
Poly Aftertouch
Ch Aftertouch
Press [REC], and turn the VALUE dial or use [INC] [DEC] to
select the event that you want to insert.
fig.03-117
• To insert one of the following events
System Exclusive Messages
Tempo Change
Mute Control
Press [TEMPO/MUTE CONTROL] so it's lit, then press
[REC].
Turn the VALUE dial or use [INC] [DEC] to select the event
that you want to insert.
2.
Press [ENTER].
3.
Enter the location (measure-beat-tick) at which you want to
insert the event.
fig.03-118
Use [CURSOR ] to select the measure, beat, or tick field,
and turn the VALUE dial or use [INC] [DEC] to specify each
value.
4.
Press [ENTER] to execute.

Erasing an event (Erase Event)

1.
In the Microscope screen, access the event that you want to
erase.
2.
Press [UNDO/ERASE].
The event will be erased.
The event erased at this time can be pasted in later if desired.
Copying/Pasting an event (p. 83)
Note
Program Change
Control Change
Pitch Bend
Polyphonic Aftertouch
Channel Aftertouch
Editing patterns (Pattern Edit)
81