About The Function Buttons; Inserting A 31-Band Geq - Roland M-300 Owner's Manual Addendum

7.
LINK button
This links adjacent odd-numbered and even-numbered GEQ processors. If they are linked, the GEQ settings will be identical.
When you activate LINK, the odd-numbered unit's settings will be applied to the even-numbered processor.

About the Function Buttons

The function buttons specific to the GEQ 1-4 tab have the following operations.
• [F5 (EDIT GEQ1)] Press this to access the GEQ EDIT popup for GEQ1. (p. 15)
• [F6 (EDIT GEQ2)] Press this to access the GEQ EDIT popup for GEQ2. (p. 15)
• [F7 (EDIT GEQ3)] Press this to access the GEQ EDIT popup for GEQ3. (p. 15)
• [F8 (EDIT GEQ4)] Press this to access the GEQ EDIT popup for GEQ4. (p. 15)

Inserting a 31-band GEQ

Use the GEQ INSERT SELECT popup to select the destination into which you want to insert a 31-band GEQ.
Accessing the GEQ INSERT SELECT popup
1.
Access the EFFECTS screen, and press [F2 (GEQ 1-4)] to display the GEQ 1-4 tab.
fig.GEQ-Rack.eps
2.
Move the cursor to the GEQ INSERT SELECT popup button for the desired GEQ, and press [ENTER].
The GEQ INSERT SELECT popup will appear.
fig.GEQ-InsSel-Guide.eps
A. Applicable GEQ indication
This indicates the GEQ to which the GEQ INSERT SELECT popup applies.
B. Insert-destination channel select buttons
These buttons select the channel into which the GEQ will be inserted.
C. Current insert destination indication
This indicates the current insert destination.
About the 31-band GEQ
13