FieldServer FS-8704-12 Driver Manual page 18

FS-8704-12 GE-EGD Driver Manual
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name
Q1 , DATA_Q
R1 , DATA_R
I1 , DATA_R
R2 , DATA_R
I2 , DATA_R
Q2 , DATA_R
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
, Data_Array_Offset , Function , Node_Name
, 0 , Passive , PLC90-30
, 0 , Passive , PLC90-30
, 0 , Passive , PLC90-30
, 1 , Passive , PLC90-30
, 2 , Passive , PLC90-30
, 1 , Passive , PLC90-30
Must correspond to the Refer to Appendix C.1 to see how many
'Local Producer' in the items are being transmitted. Note that
EGD configuration. Not the %Q, %I references are actually byte
necessarily the IP references and not bit references as
address of the producer they are always produced in multiples
port. of 8 and are always byte aligned.
Page 18 of 23
, Length , Ge_producerId Ge_exchangeId
, 1 , 1.2.3.4 , 1
, 1 , 1.2.3.4 , 1
, 2 , 1.2.3.4 , 1
, 1 , 1.2.3.4 , 1
, 1 , 1.2.3.4 , 1
, 1 , 1.2.3.4 , 1
These data types must
correspond to the
references in the EGD
range configuration.
, Ge_data_type , Ge_offset
, %q , 0
, %r , 1
, %u , 3
, %r , 5
, %i , 7
, %q , 8
These offsets
must correspond
to the offsets in
the EGD
configuration.