FieldServer FS-8704-12 Driver Manual page 15

FS-8704-12 GE-EGD Driver Manual

Note the Local Producer address. Typically it will be the same as the IP of the closest GE Ethernet port.
You can override this.

Add Ranges. Record the offset and reference for each data range in the exchange.

Save your work.

Close HWC.

Stop the processor.

Store the Hardware settings to the PLC

Put the processor back in run mode (must be running to produce.)
A second screen image shows that this exchange actually has an additional range at offset 8.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
This is the producerID.
It may be the same as the IP address of the
adapter but this is not always the case.
Page 15 of 23