Table of Contents
Advertisement
FS-8704-01 SMC TCP/IP Manual
5.
Configuring the FieldServer as a SMC TCP/IP Server
For a detailed discussion on FieldServer configuration, please refer to the FieldServer
Configuration Manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See ".csv" sample files
provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer
to communicate with a SMC TCP/IP Client.
The configuration file tells the FieldServer about its interfaces, and the routing of data required.
In order to enable the FieldServer for SMC TCP/IP communications, the driver independent
FieldServer buffers need to be declared in the "Data Arrays" section, the FieldServer virtual
node(s) needs to be declared in the "Server Side Nodes" section, and the data to be provided to
the clients needs to be mapped in the "Server Side Map Descriptors" section. Details on how to
do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the
default.
5.1.
Server Side Connection Descriptors
Section Title
Connections
Column Title
Adapter
Protocol
Example
//
Server Side Connections
Connections
Adapter,
N1,
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Function
Adapter Name
Specify protocol used
Legal Values
N1
SMT
Protocol
SMT
Page 10 of 12
Advertisement
Table of Contents
