Source Unit Mounting Locations - Rockford Fosgate RFX9100 Installation & Operation Manual

S U
OURCE NIT
The mounting position of your source unit will have a great effect on the per-
formance of your in-dash CD Player. The source unit can be installed in a
wide range of operating locations. However, care should be taken to ensure
optimum performance.
Engine Compartment
Mounting the source unit in the engine compartment will void your war-
ranty. Doing so will not only cause severe damage to your new source
unit...but will immediately promote you to "customer of the month" in
our technical support department.
Instrument Panel
Mounting the source unit in the instrument panel provides optimum
access. The source unit should be securely mounted using the "Standard
Mount" or "ISO Mount" method to ensure optimum CD Player perfor-
mance.
Center Console
Mounting the source unit in the center console provides optimum access.
Be sure the installation does not interfere with the operation of the gear
shift or parking brake. The source unit should have a mounting angle with-
in ±20° from horizontal.
Glove Box
Mounting the source unit in the glove box is adequate, but does not pro-
vide easy access. Glove box mounting should only be done if "Instrument
Panel" or "Center Console," mounting is not acceptable (i.e., maintaining
integrity of older vehicles with metal dashboards.) The source unit should
be mounted within ±20° from horizontal.
Under Dash
Mounting the source unit under the dash is adequate, but does not pro-
vide easy access. Under dash mounting should only be done if
"Instrument Panel," "Center Console" or "Glove Box" mounting is not
acceptable. Mount the source unit off to the side of the driver's area to
reduce interference with the parking brake, gear shift, or operating ped-
als. The source unit should be mounted within ±20° from horizontal.
M
OUNTING
L
OCATIONS
– 11 –