Rockford Fosgate RFX9100 Installation & Operation Manual page 41

Track scan plays the intro to each track for 10 seconds before moving to
the next track on the currently playing disc.
Track Scan
1. Press the SCAN (Preset #1) button to begin track scan mode.
2. Track scan will continue to scan until the mode is cancelled.
Track Scan Cancel
Press the SCAN (Preset #1) button a second time to cancel track scan
mode.
LCD Display
1. The LCD will display SCAN until the function is cancelled.
2. The LCD will display the track # and elapsed time for 5 seconds each time a new track
begins its intro scan.
3. After 5 seconds the LCD will revert to the default display.
* This function works identically in both CD Player and CD Changer modes.
Display Recall temporarily displays the clock, radio station, station
title*, CD track/time, disc title*, or AUX* on the LCD for 5 seconds.
Display Recall (TUNER)
1. While in TUNER mode, press the DISP button to cycle
through RADIO STATION > STATION TITLE* (if there are
no stations titled, the display will remain on the station).
2. After 5 seconds, the display will revert to the default display.
Display Recall (CDP/CDX)
1. While in CDP/CDX mode, press the DISP button to cycle through CLOCK >
TRACK/TIME > DISC TITLE*.
2. After 5 seconds, the display will revert to the default display.
Display Recall (AUX)*
1. While in AUX mode, press the DISP button to switch between CLOCK >
AUX*.
2. After 5 seconds, the display will revert to the default display.
NOTE: See DEFAULT/RECALL DISPLAY in the Basic Operation section of this manual for more infor-
mation on programming the default display.
T
RACK
D
ISPLAY
*Features available only on RFX9200/9300/9400
– 38 –
S *
CAN
R
ECALL