Table of Contents
Advertisement
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal
driving functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive
vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE : Inclination angle for car radio installation must not exceed 30˚ otherwise the front
panel will not open.
1
1
Release screw and
bracket
2
NOTE: Keep the release key in the safe place as you may need it in future to remove the unit
from the car.
TO SUPPORT THE UNIT
Dashboard
1. UNIT
. RELEASE CASE
. DASH BOARD
4. HEX NUT
5. LOCK WASHER
2
3
3
2
1
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
3
TAP
182mm
53mm
Bend these
claws, if necessay
6
6
8
EN-
4
4
5
7
4
5
6
9
Advertisement
Table of Contents
