Rockford Fosgate RFX9100 Installation & Operation Manual page 25

Track Selection
1. Press the UP button to select the next track on the disc.
2. Press the DOWN button to select the previous track.
LCD Display
1. The track number and elapsed time remain displayed.
2. After 5 seconds, the LCD will revert either to the default
display or the last programmed display.
Considerations
CDP MODE: The disc will start over at track 1 again after the last track plays.
CDX MODE: When the last track number on the current disc is reached, the next
disc will load in the CD changer and begin playing track 1.
CDP/CDX T
Random
1. Press the RDM button to randomize the tracks on a disk. If
you have a multi-disc changer, press and hold the RDM but-
ton for 1 second to randomize the discs and tracks.
2. Random will continue until the mode is cancelled.
Random Cancel
Press the RDM button a second time to cancel Random mode.
LCD Display
The LCD will display RDM until the function is cancelled.
CDP/CDX T
Forward/Reverse
Press the DOWN button and the player will take you to the
start of the same track as long as that track is more than 10
seconds in. If the track is less than 10 seconds in, pressing
the DOWN button will take the player to the beginning of
the previous track. Pressing UP takes you to the next track.
Fast Forward/Reverse
1. Press and hold the UP button to fast forward the track.
2. Press and hold DOWN to fast rewind the track.
LCD Display
The LCD will display the elapsed time as long as the UP or DOWN buttons are pressed.
*NOTE: This function works identically in both CD Player and CD Changer modes.
CDP/CDX T
RACK
RACK
S
RACK ELECTION
& D R
ISC
F
ORWARD
– 22 –
*
*
ANDOM
/R *
EVERSE