Initial Setup - Rockford Fosgate RFX9100 Installation & Operation Manual

I S
NITIAL ETUP
The faceplate is detachable as a theft deterrent.
To Detach the Faceplate
1. Press the Open Button to cause the faceplate
to slide down and forward.
2. Press the release button on the bottom front
edge of the faceplate and slide the faceplate
away from the unit.
3. The faceplate bracket will automatically close
after 5 seconds.
To Attach the Faceplate
1. Make sure that the faceplate bracket is in the
closed position.
2. Press the faceplate against the front of the unit until it clicks into place.
CAUTION: Do not attempt to attach the faceplate to the faceplate bracket when the bracket is in
the open position when operating in manual mode. You may cause damage to the mechanism that
may void your warranty
3. If desired, the faceplate can be permanently attached by affixing it to the
bracket with the screw provided.
1. Follow the instructions above to detach the faceplate.
2. Insert a paper clip or other slender object into the Reset Button hole in the
lower left corner of the unit and gently press it in until the button clicks.
CAUTION: Do press the Reset Button too hard or you may cause damage that may void your
warranty. If you need assistance, please consult an Authorized Rockford Fosgate Dealer.
D
ETACHABLE
SCAN SCAN RPT RPT RDM RDM ST LOC
VOLUME
R B
ESET
– 15 –
F
ACEPLATE
®
EON EON EON REG REG REG TP TP TP AF AF AF PTY PTY
DISC-IN V12 PUNCH R.SEAT
UTTON
CDX CDX CH CH
MP3 MP3
ROOT ROOT DIR DIR SONG SONG