Setup - RME Audio ADI-96 PRO User Manual

7.3 Setup

Function
Configuration of Peak Level Meter, LC-display and preset memory.
Application
Allows to change the display behaviour of all elements on the front panel, and to store and
recall different configurations.
Dependent on the used DSP software the ADI-96 PRO includes up to 16 user presets. All
settings except the ones found in the Setup menu will be stored (the setting of contrast and
Level Meter is global). Each preset can be stored under an individual name. The desired num-
ber or letter is available by pressing the +/- keys, the arrow keys will move the cursor to the
next position.
Copying one preset to another place can be done by first recalling the desired preset, than
store it to the other location. A security function prevents overwriting data by mistake.
Settings
Place the cursor in the Overview window on SET and press Enter.
Menu
Options
Adjustable are:
Level Meter Peak Hold 0.1 s up to 9.9 s
Level Meter Release 1 dB/s up to 100 dB/s
LC-Display Contrast 1 up to 10
Save Setup 1 up to 16
Recall Setup 1 up to 16
Boot other function
Typical Settings
Most people will adjust the hold time of the peak level to around 1 second. A level meter with
fast reaction is also desired by most people, for this the Level Meter Release should be set to
the highest value of 100 dB/s.
Informations to the menu entry Boot other function can be found in the next chapter.
User's Guide ADI-96 PRO © RME
9