Dsp Software Stereo A/D; Brief Description And Characteristics; Remote Control - RME Audio ADI-96 PRO User Manual

10. DSP-Software Stereo A/D

10.1 Brief Description and Characteristics

The DSP software Stereo A/D is an easier to configure and to handle version of Dual Mono
A/D. The single setting of each channel was - as far as possible - reduced to a common setting
of both channels. This is sufficient for most applications. The available DSP functions are ex-
actly the same as in Dual Mono A/D, and are explained in detail in chapter 9.
To avoid shifts between left and right normally all functions should operate in a link mode (both
channels always react identical). This is default in Stereo A/D. Please note that the De-esser
does not work linked at all. As the Expander might be used as noise gate, and suffer from one
channel signals, Link can be deactivated.
The number of user definable setups in mode Stereo A/D is limited to six.

10.2 Remote Control

The software Remote Control offers to control all functions and parameters of Stereo A/D mode
through a Windows PC. This includes a visualisation of all external and internal levels and the
storing/loading/editing of setups. Detailed informations can be found in chapter 9.9.
The picture shows the Windows software Remote Control in Stereo A/D mode.
User's Guide ADI-96 PRO © RME
26