Boot Other Function - RME Audio ADI-96 PRO User Manual

7.4 Boot other Function

Function
Starts the Bootloader.
Application
The Bootloader is nearly the same as the BIOS of a PC, it is the ADI's operating system at
lowest level. Its main task is to load the DSP (audio) software after switching on the device. But
there are some more functions it provides:
Loading other DSP (audio) software from the internal memory
Loading other DSP (audio) software from the serial interface
Performing several hardware tests
Settings
Place the cursor in the Overview window on SET and press Enter, then use the right arrow key
to scroll to Boot other function, then press Enter.
Menu
Options
Boot DSP-Software allows to choose from several DSP programs, stored in the ADI-96
PRO. Currently you'll find the DSP software Dual Mono A/D, an identical but easier to use
version called Stereo A/D, and an Audio Analyser providing realtime 1/3 oct analysis. Updates
will be available on our website for free and can easily be uploaded into the ADI-96 PRO
using Load Flash from PC (see chapter 8. Serial Interface).
Reload Presets allows to reload all factory setups of the corresponding DSP software. This will
erase all user settings.
The Test Procedures include the following tests:
Calculate Checksum Flash (checks the Flash memory)
Samplerate Generator (checks the function of the Clock PLL)
Keyboard (allows to test all keys on the front panel)
Display (lights up all LEDs and all signs of the LC-display)
RAM Pattern Test (checks the RAM memory used by the DSP)
Typical Settings
None
10
User's Guide ADI-96 PRO © RME