Advertisement
With an installed I64 MADI Card the Micstasy can be remote controlled via MADI. At the same time
MIDI data are transmitted via MADI.
When multiple devices are connected serially, the MADI I/O of each Micstasy causes a delay of 3
samples. Therefore at the MADI output of the last device, the data of all upstreamed devices are
delayed. The problem of this offset is solved by the function Delay Compensation.
Using the I64 MADI Card provides the ability of 8 channels being used as digital return path, sending
audio via MADI to the Micstasy's ADAT and AES outputs. For example stage and studio monitors
can be fed digitally from the Micstasy. On stage the use of an additional D/A-converter (e.g. ADI-8
DS might be necessary. The MADI output continues to carry the analog input signals and the fed-
through input data.
Tech Specs
Frequency response -0.1 dB: 20 Hz - 100 kHz
EIN @ 30 dB Gain @ 150 Ohm: 122.3 dBu
EIN @ 40 dB Gain @ 150 Ohm: 126.5 dBu
EIN @ 50/60/70 dB Gain @ 150 Ohm: 127.4 dBu
THD+N @ 30 dB Gain: < -100 dB, < 0.001 %
Signal to Noise ratio AD (SNR) @ +30 dBu: 115.2 dB RMS unweighted, 118.5 dBA
Signal to Noise ratio AD (SNR) @ +21 dBu: 112.7 dB RMS unweighted, 116 dBA
Signal to Noise ratio AD (SNR) @ +13 dBu: 110 dB RMS unweighted, 113 dBA
Sync sources: Internal, AES, word, Option (MADI)
Sample frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (external clocks)
Sample rate range: MADI: 32 - 192 kHz, word clock: 27 kHz - 200 kHz, AES: 28 kHz - 200 kHz
Jitter: Typical < 1 ns for internal, word clock, AES and MADI input
Jitter suppression: >30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate error-free even at 100 ns
Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt
Dimensions: (WxHxD) 483 x 88 x 200 mm
Warranty: 2 years
Worldwide Distribution
Am Pfanderling 60 . 85778 Haimhausen . Germany
Tel.: +49-08133-91810 Fax: +49-08133-9166
www.rme-audio.de
3 / 3
Advertisement
