Service; Specific Cs1000 Safety Information - RIDGID SeeSnake CS1000 Operator's Manual

Service

Have your equipment serviced by a qualified repair
person using only identical replacement parts�
This will ensure that the safety of the power tool is
maintained� Remove the batteries and refer servicing
to qualified service personnel under any of the following
conditions:
• If liquid has been spilled or objects have fallen into
product�
• If the product does not operate normally by following
the operating instructions�
• If the product has been dropped or damaged in any
way�
• When the product exhibits a distinct change in
performance�

Specific CS1000 Safety Information

This section contains important safety information
that is specific to the CS1000. Read these
precautions carefully before using the CS1000
to reduce the risk of electrical shock, fire or other
serious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the equipment for use by the
operator� If you have any questions concerning this
RIDGID product:
- Contact SeeSnake Support at HQSupport@
seesnake�com for questions relating to HQ or the
CS1000
- Contact your local RIDGID
- Visit www.RIDGID.com or www.RIDGID.eu to find
your local Ridge Toll contact point�
- Contact Ridge Tool Technical Services Department
at rtctechservices@emerson�com, or in the U�S�
and Canada call (800)-519-3456�
• An improperly grounded electrical outlet
can cause electrical shock and or severely
damage equipment� Always check work area for
a properly grounded electrical outlet� Presence of
a three-prong or GFCI outlet does not insure that
the outlet is properly grounded� If in doubt, have
the outlet inspected by a licensed electrician�
• Power the CS1000 only with a specifically
designated battery or a double insulated
power supply� This minimizes the risk of electrical
hazards from moisture or faulty electrical outlets�
4
WARNING
distributor�
®
• Do not operate this equipment if operator
or CS1000 are standing in water. Operating
CS1000 while in water increases the risk of
electrical shock�
• The CS1000 is not waterproof. It is dust-
resistant and splash-resistant� Do not expose the
equipment to water or rain� This increases the risk
of electrical shock�
• Do not use where a danger of high voltage
contact is present� The equipment is not
designed to provide high voltage protection and
isolation�
• Read and understand this operator's manual,
the reel operators' manual, the instructions for
any other equipment in use and all warnings
before operating the CS1000� Failure to follow
all instructions and warnings may result in property
damage and/or serious personal injury�
• Always use appropriate personal protective
equipment while handling and using equipment
in drains� Drains may contain chemicals, bacteria
and other substances that may be toxic, infectious,
cause burns or other issues� Appropriate personal
protective equipment always includes safety
glasses and may include equipment such as
drain cleaning gloves or mitts, latex or rubber
gloves, face shields, goggles, protective clothing,
respirators and steel toed footwear�
• If using drain cleaning equipment at the same
time as using drain inspection equipment,
only wear RIDGID drain cleaning gloves.
Never grasp the rotating drain cleaning cable with
anything else, including other gloves or a rag�
They can become wrapped around the cable,
causing hand injuries� Only wear latex or rubber
gloves under RIDGID drain cleaner gloves� Do not
use damaged drain cleaning gloves�
• Practice good hygiene� Use hot, soapy water
to wash hands and other exposed body parts
exposed to drain contents after handling or using
drain inspection equipment� Do not eat or smoke
while operating or handling drain inspection
equipment� This will help prevent contamination
with toxic or infectious material�
Ridge Tool Company