RIDGID SeeSnake CS1000 Operator's Manual page 33

View Recycled Jobs
Selecting the Recycle Bin icon brings up a list of jobs
you have recycled� From here you can recover or
permanently delete Jobs� Restoring a job will return it
to the Job Browser� Permanently deleted Jobs are not
recoverable�
Figure 60 – Restore Selected Job(s)
Figure 61 – Permanently Delete Selected Job(s)
Use the Select Key
column to select which Job(s) you want to work with�
Then use the right Arrow Key
right column and the Select Key
Restore or Permanently Delete�
Ridge Tool Company
to check boxes in the left
to navigate to the
to select either
Control Reel Overlay
Selecting Control Reel Overlay will open the CountPlus
Settings screen� This screen has a video preview in
the left column and a CountPlus Overlay in the right
column� You can toggle between enabling and disabling
the overlay by pressing the
Figure 62 – Enable Overlay
Figure 63 – Disable Overlay
Press the Menu Key
Edit Count Units
Selecting Edit Count Units will open the Reel Settings
Menu� From here you can use the left and right
Keys to toggle between Feet and Meters� Your
choice will appear with a blue highlight and outline�
Figure 64 – Set Count Units
Save your preference by using the down
to navigate to Save at the bottom of the screen and
pressing the Select Key
to the Settings Menu� Alternatively you can press the
Menu Key to return to the Settings Menu�
Select Key �
to return to the Settings Menu�
Arrow
Arrow Key
� This will take you back
31