Service and Repair
Improper service or repair can cause the
CS12x to be unsafe to operate.
Service and repair of the CS12x must be
performed at a RID GID Independent Autho-
rized Service Center. To maintain the safety
of the monitor, make sure a qualified repair
person services your unit using only iden-
tical replacement parts. Discontinue using
the CS12x, remove the battery, and contact
service personnel under any of the following
conditions.
• If liquid has been spilled or objects
have fallen into the equipment.
• If the equipment does not operate nor-
mally when operating instructions are
followed.
• If the equipment has been dropped or
damaged.
• If the equipment exhibits a distinct
change in performance.
For information on your nearest RIDGID In-
dependent Service Center or any service or
repair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com.
• Contact
Ridge
Technical
Service
rtctechservices@emerson.com or, in
the USA and Canada, call 1-800-519-
3456.
Tool
Company
Department
at
Disposal
Parts of your system contain valuable mate-
rials that can be recycled. There are compa-
nies that specialize in recycling that may be
found locally. Dispose of the components in
compliance with all applicable regulations.
Contact your local waste management au-
thority for more information.
EC Countries: Do not dis-
pose of electrical equipment
with household waste!
According to the Europe-
an Guideline 2012/19/EU for
Waste Electrical and Elec-
tronic Equipment and its im-
plementation
legislation, electrical equip-
ment that is no longer usable
must be collected separately
and disposed of in an environ-
mentally correct manner.
Battery Disposal
EC Countries: Defective or used batteries
must be recycled according to the guideline
2006/66/EEC.
CS12
x
into
national
– English – 17