Notes - RIDGID SeeSnake CS1000 Operator's Manual

Trouble Shooting
Problem
Camera video image not seen�
Flashing Battery Warning Appears� 18 V- Li-Ion batteries low�
Ridge Tool Company
Probable Fault
No power to SeeSnake�
Connections faulty�
Batteries low�

Notes

Solution
Check power is correctly plugged in or
battery is charged� Press power key on
CS1000 body or keypad�
Check connections to CS1000 unit from
SeeSnake� Make sure system cable is
firmly connected to the System Connector
on the front left edge of the keyboard�
Recharge batteries or connect to external
power supply�
Recharge batteries� Switch to AC power
(110/220VAC)�
39