Ricoh 9016 Operating Instructions Manual page 250

Registering Addresses and Users for Facsimile/Scanner Functions
" Label insertion
Use label insertion to print information such as the destination name on the
sheet printed out at the destination.
Data is printed as follows:
• Destination Name
The destination name specified in [Fax Destination] is printed with "To" be-
fore it at the top of the sheet.
• Standard Message
A registered two-line sentence is printed under "Destination Name". To
use this function, set Label Insertion to [On] when programming fax desti-
nations and also select [Programmed Name] when sending fax documents.
Fax header and label insertion are also printed when sending by e-mail us-
ing the fax function.
You can program a standard message other than those registered in the
machine. See "Specifying Options", Facsimile Reference.
You can program the following items in an IP-Fax Destination:
" IP-Fax
Register the IP-Fax destination. You can register the name using up to 128
characters. You must make this setting when using IP-Fax.
This setting only works if the IP-Fax function has been selected.
" SUB Code
Registering a SUB Code allows you to use Confidential Transmission to send
7
messages to the other fax machines which support a similar function called
"SUB Code". See "Setting SUB Codes for Transmission", Facsimile Reference.
" SEP Code
Registering a SEP Code allows you to use Polling Reception to receive faxes
from the other fax machines which support Polling Reception. See "Setting
SEP Codes for Reception", Facsimile Reference.
" Select Protocol
Select the protocol for the IP-Fax transmission.
This setting only works if the IP-Fax function has been selected.
Reference
p.228 "Registering Names to a Group"
p.244 "Registering a Protection Code"
162