Master Roll Replacement - Ricoh DX 3243 Operating Instructions Manual

Master Roll Replacement

The Master End indicator (C) is lit
when it is time to replace the master
roll.
A
Pull out the master tray.
B
Press the release button to open
the master feeding cover.
C
Unwrap the tape from the new mas-
ter roll.
D
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
ANT065S
Note
❒ It is necessary to replace the mas-
ter roll even if some master re-
mains on the old roll.
E
Set the new master roll in the mas-
ter tray.
ZJVH070E
Master Roll Replacement
TSLT010E
ZFRH260E
4
81