Printing In Two Colours - Ricoh DX 3243 Operating Instructions Manual

Printing in Two Colours

After printing in one colour, you can
print in another colour on the same
side of the print.
Important
❒ Leave the prints for a while before
printing on them again to let the
ink dry.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colours at
a time.
A
Prepare two originals. Set the first
original on the exposure glass.
B
Enter the number of prints with
the number keys.
C
Press the {Start} key.
D
Remove the prints from the paper
delivery tray and set them on the
paper feed tray again as shown in
the illustration.
ANT113S
E
Exchange the drum unit. See p.69
"Changing the Colour Drum
Unit".
ANT008S
F
Set the second original and press
the {Start} key.
Make Colour Prints
ANT015S
ANT079S
ANT054S
71
3