Online Settings - Ricoh DX 3243 Operating Instructions Manual

7 Online Settings

Limitation
❒ The optional printer controller is required for these settings.
❒ The displayed Online Settings menus depend on the type of printer controller.
No. Mode
1 Hold Data-in
2 List/Test Print
3 DHCP (Auto-Ob-
tain)
4 IP Address
5 Subnet Mask
6 Gateway Address
7 Ethernet Speed
Description
You can select to have Hold Data-in mode either "On" or "Off"
when the power is turned on, or after mode settings have been
cleared.
Note
❒ Default: Off
Allows you to print the system controller's configuration data.
Select either "On" or "Off" for DHCP. If you select "On", the ma-
chine obtains its IP address automatically by DHCP. If you se-
lect "Off", a static IP address must be manually specified as the
machine's IP address.
Note
❒ Default: On
If you have selected "Off" for the DHCP setting, you must spec-
ify a static IP address for the machine here.
Note
❒ Default: 11.22.33.44
If you have selected "Off" for the DHCP setting, you must spec-
ify a subnet mask for the machine here.
Note
❒ Default: 0.0.0.0
If you have selected "Off" for the DHCP setting, you must spec-
ify a gateway address for the machine here.
(A gateway is a connection or interchange point between two
networks.)
Note
❒ Default: 0.0.0.0
Allows you to specify the network access speed.
Note
❒ Default: Auto Select
User Tools Menu
5
115