Ricoh DX 3243 Operating Instructions Manual page 62

Printing Functions
Storing Class Mode Settings
A
Press the {User Tools} key.
3
B
Use the {U}{T} keys to select 4
Initial Settings, and then press
the {OK} key.
C
Use the {U}{T} keys to select 6
Program/Change Class, and then
press the {OK} key.
56
D
Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
ANT027S
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Escape} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
number of prints, and then press
the {q} key.
F
With the number keys, enter the
number of classes, and then press
the {q} key.
Note
❒ Repeat Steps
all of your classes.
G
Press the {OK} key.
H
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
D F
to to register