Program; Registering Print Settings - Ricoh DX 3243 Operating Instructions Manual

Program

Use this function to store up to nine
frequently used print job settings and
to recall them for future use.
Note
❒ The stored contents will not be
cleared even when you turn off the
main switch.
❒ The stored contents cannot be de-
leted. To change the contents of a
program, overwrite it with new
print settings.
❒ You can store settings for the fol-
lowing functions:
• Type of Original
• Image Density
• Image Position
• Printing Speed
• Fine Mode
• Preset Reduce/Enlarge
• Edge Erase
• Economy Mode
• Memory/Class
• Combine/Repeat
• Skip Feed
• Hold Data-in
❒ You cannot store settings for A3
Paper Feed function.
❒ You cannot store settings for Secu-
rity mode, nor for the Program
function itself.

Registering Print Settings

A
First specify the print settings that
you wish to store.
B
Press the {Program} key.
C
Use the {U}{T} keys to select Reg-
ister, and then press the {OK} key.
D
Use the {U}{T} keys to select a
number.
Note
❒ If the number is already in use, a
message will be displayed asking
whether you wish to overwrite
the settings stored. To overwrite,
press the {OK} key. Otherwise
press the {Escape} key to return
to the previous display, and then
select another number.
E
Press the {OK} key.
Program
3
ANT006S
67