HP Configuring Arrays Reference Manual page 93

</Array>
<Array ID="B">
<!-- Array Drive Type is SAS -->
<!-- Free space
<!-- 1I:4:6 (72 GB),2I:2:4 (72 GB),2I:2:3 (72 GB),2I:2:2 (72 GB)-->
<Drive>1I:4:6, 2I:2:4, 2I:2:3, 2I:2:2</Drive>
<OnlineSpare>No</OnlineSpare>
<LogicalDrive ID="2">
</LogicalDrive>
<LogicalDrive ID="3">
</LogicalDrive>
<LogicalDrive ID="4">
</LogicalDrive>
<LogicalDrive ID="5">
</LogicalDrive>
</Array>
</Controller>
</Config.document>
XML input
XML input follows the same format as the document for XML output (on page 92). Use the same parameter
order as the standard input format.
The following example shows a simple input script in both standard and XML formats.
0 GBytes -->
<Raid>5</Raid>
<Size>52478</Size>
<Sectors>32</Sectors>
<StripeSize>64</StripeSize>
<ArrayAccelerator>Enabled</ArrayAccelerator>
<Raid>5</Raid>
<Size>52478</Size>
<Sectors>32</Sectors>
<StripeSize>64</StripeSize>
<ArrayAccelerator>Enabled</ArrayAccelerator>
<Raid>5</Raid>
<Size>52478</Size>
<Sectors>32</Sectors>
<StripeSize>64</StripeSize>
<ArrayAccelerator>Enabled</ArrayAccelerator>
<Raid>5</Raid>
<Size>52478</Size>
<Sectors>32</Sectors>
<StripeSize>64</StripeSize>
<ArrayAccelerator>Enabled</ArrayAccelerator>
HP Array Configuration Utility 93