Wizards - HP Configuring Arrays Reference Manual

Generate SmartSSD Wear Gauge Report
o
Run Array Diagnostic Reports
o
For this example, use the diagnostic reports selection.
Select Run Array Diagnostic Reports.
2.
The array diagnostic report screen appears.
Select a device or devices from the Report Contents panel.
3.
The Available Tasks panel appears. For more information, see "Diagnostics tasks (on page 47)."
Click one of the task buttons:
4.
If you select Generate Diagnostic Report, wait for the report to generate, and then click Close Report
o
or Save Report.
If you select View Diagnostic Report, the report appears. When you are finished viewing the current
o
report, click Close Report, Refresh Report, or Save Report.
If you select View Serial Output Logs, the log appears. When you are finished viewing the log, click
o
Close Logs.
For more information about reports and viewing them in a browser, see the following sections:
•
"Reported information (on page 100)"
•
"Identifying and viewing diagnostic report files (on page 107)"
•
"Identifying and viewing SmartSSD Wear Gauge report files (on page 109)"

Wizards

From the Wizards screen, you can perform tasks related to controllers, arrays, physical drives, and logical
drives.
HP Array Configuration Utility 49