HP Configuring Arrays Reference Manual page 52

A list of all possible options for that wizard appears on the right side of the screen, replacing the wizard
list.
Select the settings or configuration options for the device.
4.
Use the Next and Back buttons to navigate multiple screens of options.
5.
Click Save or OK.
6.
Using Express Configuration
Express Configuration is a wizard that creates the optimum number of arrays and logical drives from all of
the physical drives that are attached to the controller.
This wizard is available only under two conditions: when an array on the selected controller contains unused
drive space, or when physical drives are connected to the controller, but they are not assigned to an array.
To use Express Configuration:
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 27)."
If ACU is already open, click the Wizards tab.
Select a controller from the Controller/Device menu.
2.
The System Status, Systems And Devices, and Available Wizards panels appear. The listed wizards are
available for this device in its current configuration. For more information, see "Wizards (on page 49)."
Click Express Configuration.
3.
HP Array Configuration Utility 52