Using The Acu Cli - HP Configuring Arrays Reference Manual

ACU displays possible logical drive configurations based on groupings of drives with the same
capacity.
For each logical drive, select a RAID Type.
4.
ACU identifies possible RAID configurations and lists spare drive capability, the size of the logical
drive, fault tolerance, and write performance.
Click Next.
5.
The wizard configures the arrays and logical drives.
When the configuration is complete, click Finish.
6.

Using the ACU CLI

Access ACU with one of the many methods available:
•
Accessing ACU in the offline environment (on page 18)
•
Accessing ACU in the online environment (on page 23)
Some ACU CLI features are only available in the offline environment, such as setting the boot controller and
boot volume.
ACU CLI has two operating modes:
•
Console mode
You can adjust several configuration parameters on several devices without having to restart ACU each
time.
•
Command mode
("Opening the CLI in Console
("Opening the CLI in Command
mode" on page 54)
mode" on page 54)
HP Array Configuration Utility 53