Honeywell Q7300H System Integration Manual page 39

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address
All User Addresses starting with a g are identical in purpose to the UserAddresses of the same name but
gStatusEmHtStgsOn
without the g . The g points exist for binding to other nodes (they use the Guaranteed Periodic Update
mechanism), while the non-g points are used for polling from a monitoring tool or workstation.
gStatusFan1On
gStatusFan2On
gStatusHeatStgsOn
gStatusLocalOvrRide
gStatusMode
gStatusOcc
Table A3. Status Points (Right Continued).
39
Comments
63-4366