Honeywell Q7300H System Integration Manual page 11

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address
SelectedFile The index number of the file that was last selected for data transfer.
OpenCircuit Not supported, set to zero.
OutofLimits Not supported, set to zero.
OutofService Not supported, set to zero.
ProgFail Not supported, set to zero.
ProgMode Not supported, set to zero.
ReportMask Internal use only.
SchedHour The hour of the event; 0 through 23 hrs.
SchedMinutes The minutes of the event. T7300 implements event times in 15-minute increments. If values other than 0, 15,
30, and 45 are written, SchedMinutes is changed to the nearest permitted value.
SchedOcc The occupancy state of the schedule can be one of the states listed. In case SchedOcc is not one of the
permitted values, SchedOcc is changed to the SchedOcc(read) as listed:
NrTimeModes There are four time mode events per day in this schedule. NrTimeModes is always four. Attempts to write
another value causes the write to the file to be ignored.
Scheduleld ScheduleId is assigned by a tool for later schedule identification by a user interface that displays or changes
the schedule. Saved in EEPROM.
Table A1. Miscellaneous (Right Continued).


Occ, Bypass, Standby Space is scheduled to be occupied.

UnOcc Space is scheduled to be unoccupied.
Null and any other Schedule entry is ignored.
Comments
11
(continued)
63-4366