Transporting; Before Loading - Honda HSS724A Owner's Manual

BEFORE LOADING

1.Loading the snow blower on a trailer should be performed on a firm,
level surface.
2.Use a loading ramp that is strong enough to support the combined
weight of the snow blower and the operator:
Weight of snow blower: (Operating weight)
Type
AT
ATD
AW
AWD
3.The loading ramp must be long enough so that
its slope is 15° (26%) or less.
Length of
Ramp (L)
Height (H)
4.If the truck bed has a low roof or cover, with less than 5 ft (1.5 m)
of headroom, lower the discharge deflector for better clearance, or
remove the chute assembly.
5.Check that there is sufficient fuel in the tank. The engine may stall
on the ramp if there is not enough fuel in the tank.
62
Model HSS724A
243 lbs (110 kg)
253 lbs (115 kg)
220 lbs (100 kg)
231 lbs (105 kg)
8.2 ft 9.8 ft
(2.5 m) (3.0 m)
2.1 ft 2.5 ft
(65 cm) (75 cm)

TRANSPORTING

11.5 ft
(3.5 m)
3.0 ft
(90 cm)
L
H