Engine Oil Change - Honda HSS724A Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Place the snow blower on a level surface.
2.Place a suitable container below the engine (right side) to catch the
used oil, then remove the oil filler cap and the drain plug.
To avoid loosening the drain plug extension, hold it with a 17 mm
wrench while loosening the drain plug with a 10 mm wrench.
DRAIN PLUG
3.Allow the used oil to drain completely into an approved container,
then reinstall the drain plug with a new sealing washer, and tighten it
securely.
TORQUE: 8.1 ft-lb (11 N•m)
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of used motor oil
properly. Put it in a sealed container, and take it to a recycling
center. Do not throw it in the trash, pour it on the ground, or pour it
down a drain.
SERVICING YOUR SNOW BLOWER
SEALING WASHER
45