Table of Contents
Advertisement
During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
p.
99
102
.
6.
If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
STOPPING THE ENGINE
34
),
Emergency Engine Stopping
34
), and
35
).
Side-Mount Type
EMERGENCY STOP
SWITCH
on
EMERGENCY STOP
SWITCH CLIP
Panel-Mount/Top-Mount Types
EMERGENCY
STOP SWITCH
EMERGENCY STOP SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
PULL
CONTROL PANEL
EMERGENCY
STOP SWITCH
LANYARD
PULL
OPERATION
To stop the engine in an emergency,
pull the emergency stop switch clip
out of the emergency stop switch by
pulling the emergency stop switch
lanyard.
We suggest that you stop the engine
this way occasionally to verify that
the emergency stop switch is
operating properly.
Before leaving the dock, check the
operation of the emergency stop
switch.
Turn the ignition switch key to the
OFF position after verifying the
emergency stop switch operation.
49
Advertisement
Table of Contents
