Table of Contents
Advertisement
OPERATION
If the engine is not properly
warmed up bef ore raising the
engine speed, the buzzer and
overheat indicator may activate
and the engine speed will be
automatically reduced.
The cooling system may f reeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may cause
engine damage.
46
During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
p.
99
102
.
6.
If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
Top-Mount Type
34
),
EMERGENCY STOP
34
), and
SWITCH
35
).
on
EMERGENCY STOP
SWITCH CLIP
1.
Put the emergency stop switch clip
in the emergency stop switch, and
attach the emergency stop switch
lanyard securely to the operator or
to the operator's PFD (Personal
Flotation Device).
EMERGENCY
STOP SWITCH
LANYARD
Advertisement
Table of Contents
