11. Storage - Honda Marine BF75A Owner's Manual

I
11. STORAGE
For longer service life of the outboard
motor, have your outboard motor ser-
viced by an authorized Honda Marine
dealer before storage.
If you are unable to take the motor to
your
dealer, proceed as follows:
Draining the Carburetors
Be careful not to spill gasoline. Spilled
gasoline or gasoline vapor may ignite.
If any gasoline is spilled, make sure
the area is dry before storing or trans-
porting the motor. Do not smoke or
allow flames or sparks where gasoline
is drained or stored.
m Gasoline is highly
flammable and explosive, and
you can be burned or seriously
injured when handling fuel.
l
Stop engine and keep heat,
sparks, and flame away.
l
Handle fuel only outdoors.
l
Wipe up spills immediately.
128
#I CARHURETOR
DRAIN SCREW
#2 CARBURETOR
DRAIN SCREW
f3 CARBURETOR
3RAIN SCREW
DRA&
~4 CARBURETOR
HOSE
DRAIN SCREW
1. Remove the engine cover and
disconnect
the
fuel hose connector.
2. Loosen the #4 carburetor drain
screw to drain the fuel.
3. Remove the drain hose from the g4
carburetor, and reinstall it on the # 3
carburetor to drain the fuel.
4. Drain
the #2 and #I carburetors in
the same manner, using the $$. 4 car-
buretor's drain hose.
5. After thoroughly drain the carburetors,
tighten the drain screws securely.
6. Reinstall the drain hose on the #4
carburetor.