5. STARTING
THE ENGINE
(REMOTE
CONTROL
TYPE)
N
(neutral)
3. Move the control lever forward or
backward pushing the throttle button
to open the throttle slightly.
4. When the engine is cold or the
ambient temperature is low, put on
the choke switch. This will provide
a rich fuel mixture.
START
KEY
SWITCH
5. Holding the choke switch in position
(ON), turn the ignition swich key to
the START position and release the
key when the engine starts.
The starter motor consumes a large
amount ofcurrent.
Do not run it
continuously
for more that 5 seconds
at a time.
If the engine does not start within 5
seconds wait at least 10 seconds wait
at least 10 seconds before using the
starter motor again.
[NOTICE]
Do not turn
the ignition
switch
kev to the start
position
while
the
I
"
engine
is running.
This
can damage
the starter
motor
and flywheel.
6. After starting the engine, return the
lever slowly to a position where
the engine dose not stall, and hold
the lever in that position.
The control lever will not shift the
gears unless it is returned to the
neutral position.