Honda Marine BF75A Owner's Manual page 58

5. STARTING THE ENGINE (TILLER HANDLE TYPE)
EMERGENCY STOP SWITCH
&l;;~f~;;STOP EMEkCENCY STOP
SWITCH LANYARD
I. Engage the emergency stop switch
clip (located at one end of the emer-
gency stop switch lanyard) with the
emergency stop switch.
Attach the other end of the emergency
stop switch lanyard securely to the
operator.
m If the operator does
not attach the emergency stop
switch lanyard, and is thrown
from his seat or out of the boat,
the out-of-control boat can seri-
ously injure ttne operator, pas-
sengers, or bystanders.
Always properly attach the
lanyard before starting the engine.
The engine will not start unless the
emergency stop switch clip is engaged
with the emergency engine stop switch.
GEAR SHIFT
LEVER-
2. Move the gearshift lever to the N
(neutral) position.
The engine will not start unless the
gearshift lever is in the N (neutral)
position.
56