Too Much Spinning Noise - Haier XQBM22-C Service Manual

Too much spinning noise

If the noise of the motor is too much
If the noise of the retarder is too much
No spinning
The washing and draining are normal
Check the On/Off point of the dry
Check if the clutch pawl is pulled enough
MAINTENANCE SERVICE AND TROUBLE SHOOTING
If the washing machine is
set horizontally
Y
If the hanger is wrongly used
N
N
If the motor is fastened tightly
Y
N
If the departing of the
ratchet and pawl is well
Y
If the machine body vibrate
resonantly with the cabinet
N
If the balance ring is rubbing
the outer tub cover
N
If the connecting pipe or the
wire unit bumps the outer tub
N
The hanger seat is lack of oil.
Inject oil at the hanger seat
reed tube and stop switch
Normal
Y
Replace the retarder clutch
N
Set the machine horizontally
Y
Replace the hanger
Y
Replace the motor
N
Fasten the motor
Y
Replace the retarder
N
Adjust the angle or the distance of the ratchet and pawl
Y
Adjust the cabinet to acquire balance
Y
Adjust the gap between the balance ring and the outer tub
Y
Fix the connecting pipe and the wire unit
No On/Off
point
Replace the dry reed tub or stop switch
N
Replace the drain motor
At this time please confirm if the drain motor works normally